Note: You may need to change the Color Density setting if your custom profile was created to optimize D-max and color gamut.

Printing With Epson Drivers for Windows 141

2.Select the correct settings to match your ICC profile. These settings override any paper configuration settings you may have made using the printer’s control panel.

•Color Density lets you control the ink saturation level (for example, when you turn off color management in your printer software).

•Drying Time per Print Head Pass lets you print with non-Epson media and avoid smearing the ink. You can make the print head wait up to 5 seconds after each pass to allow ink to dry on the page.

•Paper Feed Adjustment helps reduce banding. Choose a lower value if you see white lines on your prints, or a higher value if you see dark lines.

•Paper Suction lets you decrease the paper suction level when printing on thinner papers (less than 12 lb), such as CAD drafting paper.

•Paper Thickness helps reduce vertical banding and creates a sharper image when printing on unusually thick or thin paper.

•Platen Gap lets you fine-tune the setting for various paper thicknesses.

•Roll Paper Back Tension lets you adjust the tension when printing on roll paper. Change the value if you find wrinkles on your printouts when Auto is selected.

3.When you finish selecting Paper Configuration settings, click OK.