214 Using the Optional Auto Take-Up Reel

WARNING: Make sure the Auto Take-Up Reel is installed properly and is turned off before loading paper. If it is installed incorrectly or operates unexpectedly, bodily injury may occur.

Loading Roll Paper Onto the Take-Up Reel

Before you load roll paper onto the take-up reel core, check the following:

•Turn off the Auto Take-Up Reel to avoid injury.

•Make sure that the leading edge of the roll paper is straight.

1. Plug in the power cord.

2.Make sure the printer is on and the Auto Take-up Reel icon appears on the LCD panel.

3.Make sure that the roll paper is loaded in the printer properly. For instructions, see page 59.

4.Press the l button to select (Auto Cut Off).

5.Press the d button to feed the roll paper out of the printer.

Continue with the steps in the next section if you want to wind your prints forward, or page 216 if you want to wind your prints backward.