196Solving Problems
Problem | Solution |
|
| |
|
|
|
| |
Blank paper is printed. | ◗ Make sure your software is installed correctly and the printer is selected. | |||
| ◗ Make sure the Paper Size setting in your printer software is correct for the | |||
|
| paper you’re using. | ||
| ◗ Make sure the Paper Source setting in your printer software is correct. | |||
|
|
|
| |
A ruled line on your print | ◗ Align the print head as described on page 166. | |||
appears to shift. | ◗ Run a nozzle check and cleaning cycle; see page 162. | |||
| ||||
|
|
|
| |
Color images print in black | ◗ Make sure the Color setting is correct in your printer software. | |||
only. |
|
|
|
|
|
|
|
|
|
The printer continues to feed | ◗ | Press the |
| Pause/reset button on the printer to clear any print job data |
| ||||
paper after you have |
| in the printer’s buffer and reset the printer. | ||
cancelled a job. | ◗ Make sure the paper source is set correctly. | |||
|
|
|
| |
Roll paper cannot be cut. | ◗ The paper cutter may be dull. Follow the instructions on page 173 to replace | |||
|
| the cutter. |
|
|
| ◗ | Make sure |
| appears on the LCD display. If not, press the l Paper |
|
| Source button to select this setting. Also check the Auto Cut settings in your | ||
|
| printer software. | ||
|
|
|
| |
Printing is too slow. | ◗ Turn on the High Speed setting. | |||
| ◗ Choose a lower resolution in your printer software for faster printing. | |||
◗ Clear space on your hard drive or run a defragmentation utility. ◗ Don’t run too many applications at the same time.
◗ Turn off virtual memory. ◗ Add RAM to your system.
◗ Try printing when there is less traffic on the network, or move the printer to a different network segment.