WARNING: The printer is very heavy. Make sure you have four people lift it.
Caution: Do not roll the printer on angled or uneven surfaces.
Maintaining and Transporting the Printer 183
7.Lift the printer using the hand grips where provided. (See the stickers located near the rear hand grips for the correct holding position.)
8.Keep the printer level while moving it. See page 184 for information about setting up the printer after transporting it.
To ship the printer a longer distance, you should repack it using the original box and packing materials. If you don’t have the original packaging, you can purchase replacement packaging from Epson. See page 12 for more information.
Moving the Printer on the Stand
When you need to move the printer a short distance, such as within the same building, you can roll the printer on its casters.
1.Make sure the printer is turned off and the carriage is in the home position (on the far right). If not, turn the printer back on, wait until the carriage moves to the home position, then turn off the printer.
2.Disconnect the power cord and interface cable.
3.Remove any paper and close the roll paper cover. Make sure the front cover is closed.
4.Store the paper basket as described on page 82.