Appendix B:

Using the

Optional Auto

Take-Up Reel

213

If you want to print multiple images on roll paper and have the printouts rolled up automatically, you can use the optional Auto Take-Up Reel (Epson Stylus Pro 9900 only).

To install the Auto Take-Up Reel, follow the instructions in the manual that came with it.

You can wind your printed media either forward (with the printed surface outside), or backward (with the printed surface inside).

Note: Epson

Doubleweight or Singleweight Matte paper should be wound forward.

Winding forward

Winding backward

The table below describes the status of the Auto Take-Up Reel as indicated by the Sensor light.

Sensor light status

Description

 

 

On

Ready to use.

 

 

Flashing rapidly

Operating

 

 

Flashing slowly

Power-saving mode

 

 

Flashing very slowly

The Auto Take-Up Reel has an error and stopped

 

working; check the installation and see page 201 for

 

additional solutions.

 

 

Off

Turned off.

 

 

Sensor light