WARNING: Do not touch the Auto Take-Up Reel while it is operating; doing so may result in injury.

Turn off the Auto Take-Up Reel before removing the reel; if the reel operates unexpectedly, bodily injury may occur.

Using the Optional Auto Take-Up Reel 217

Printing Using the Auto Take-Up Reel

Once the Auto Take-Up Reel is installed and paper is attached to it, you can use it to take up your prints.

1.Set the Auto switch to Forward or Backward, depending on how you set up the paper.

2.Send a print job to the printer. The Auto Take-Up Reel takes up the roll paper 1/4 to 1/2 turn at a time.

3.When you are ready to remove your prints, set the Auto switch to Off.

4. Press the button to cut the paper.