The Cut Sheet Feeder

If you want to use the short tear-off feature, you can tear off the perforation of the continuous paper at the cut sheet feeder’s edge. See the section on short tear-off (page 3-23) for more information.

WARNING: Never attempt to print on labels when the cut sheet feeder is installed.

Note: To clear a paper jam at the exit point of continuous paper, you may need to open the cut sheet feeder’s front cover. To do this, first open the printer cover and then raise the cut sheet feeder’s cover. Clear the jammed paper and then close the cover. Do not operate the printer with this cover open.

Single sheet insertion

Your cut sheet feeder also has a single sheet loading feature. This feature is especially useful because it allows you to switch to a different type or size of paper without replacing the supply of paper already in your cut sheet feeder.

Before using this feature, make sure that the cut sheet feeder is selected with paper select.

Using Printer Options 5-17