ProblemSolution

Two or more sheets feed at the same time.

The paper feed is crooked.

You tried to manually insert a single sheet, but the sheet was not fed.

There may be too many sheets of paper in the cut sheet feeder’s bin. The bin can hold a maximum of 150 sheets of paper (82g/m2). Remove some of the excess sheets. Refer to 5-2.

The stack of paper may not have been loosened sufficiently. Before loading a stack of paper, be sure to fan it sufficiently and align the edges of the stack. Refer to 5-5.

The paper may be old or creased. Discard it and load new, clean sheets of paper.

You may not be using the proper size paper. Make sure to use paper sizes that are within the range specified in Chapter 8. Refer to 8-16.

The single sheet may have been inserted in the wrong place. Check the triangle mark and insert the sheet again. Refer to 5-17.

Troubleshooting 7-23