SelecType Settings

Note:

•The settings changed by SelecType do not come into effect until the printer is initialized. Initialize (reset) the printer after changing any of the settings with SelecType.

•The following options are described in more detail later in this chapter: PAGE LENGTH, 1” SKIP, AUTO TEAR OFF, FONT, PITCH, COUNTRY, and CG TABLE.

Initializing the settings

To make your new SelecType settings effective, the printer needs to be initialized before printing. Your printer has a special control panel feature that allows you to initialize the printer’s settings without having to turn off the printer. It also allows you to conserve your ink supply, because it does not activate the print head cleaning cycle.

After changing the SelecType settings, press both the ON LINE and LOAD/EJECT buttons at the same time.

3-16 Using the Printer