Epson SQ-2550, SQ-850 7-18Troubleshooting, Continuous paper does not feed properly. (continued)

ProblemSolution

Continuous paper does not feed properly. (continued)

Regular gaps appear in the printout.

Skip over perforation is set, but the perforation does not fall in the center of the skip.

You may have pressed the LOAD/EJECT button with continuous paper already set at the loading position. Pressing the LOAD/EJECT button with continuous paper already loaded in the printer causes the paper to be ejected. If this happens, press the LOAD/EJECT button once more to reload the paper. Refer to

2-14.

The skip over perforation may be set with SelecType. Enter SelecType and turn off the skip over perforation feature. Refer to 3-19.

The page length for continuous paper may not be set correctly. Change the page length with your software program. You can also use the ESC C n or ESC C 0 n command to specify the page length.

The loading position of the paper may be too high or too low. Use the micro-adjustment feature to reset the loading position so that the perforation is centered within the skip area.

7-18 Troubleshooting