Glossary

push tractor

Abuilt-in device that moves continuous paper through the printer.

RAM

Random Access Memory. The portion of the printer’s memory used as a buffer and for storing user-defined characters. All data stored in RAM is lost when the printer is turned off.

reset

To return a printer to its defaults, by either a command, an INIT signal, or by turning the printer off and on.

SelecType setting

A feature that lets you set up various printer settings or change default settings at the control panel.

self test

A method of checking the operation of the printer. When the self test is run, the printer prints out its SelecType settings and the characters that are stored in its ROM.

serial interface

See interface.

short tear-off

A feature that automatically feeds the perforation of continuous paper to the tear-off position and then advances the paper back to the loading position. This position can be adjusted with the micro-adjustment feature. See micro adjustment.

skip over perforation

A function that causes the printer to stop printing, skip over a perforation in continuous paper, then resume printing again. Most application programs handle this task, but it may be useful when listing programs.

GL-8 Glossary