Problem

Solution

Continuous paper

 

does not feed

 

properly.

 

The LOAD/EJECT

Paper select may not be set to Tractor.

button was pressed

Take the printer off line and press the

and the platen

PAPER SELECT button until the display

rotated, but paper did

shows Tractor. Refer to 2-9.

not feed.

The paper may not have been set

 

 

correctly in the push tractor. Set the

 

paper again to the tractor.

The paper feed is

The paper guide may be in the upright

crooked or the paper

position. When using continuous paper,

jams.

make sure that the paper guide is

 

lowered so that it can act as a paper

 

separator. Refer to 2-13.

 

The paper may be caught on the edge

 

guides. When using continuous paper,

 

make sure that the paper guide is closed

 

and the edge guides are positioned at

 

the center of the paper’s width. Refer to

 

2-13.

 

The holes on either side of the paper

 

may not be aligned. Reposition the

 

paper on the tractor pins. Refer to 2-12.

 

 

7-16 Troubleshooting