ProblemSolution

The position of the sprocket units may not match the width of the paper. Position the right sprocket unit to remove any excess slack across the paper. Refer to 2-13.

The sprocket levers may be unlocked or the sprocket covers may be open. Position the sprocket units to match the width of your paper then lock them in place by pressing the sprocket lock levers forward. Refer to 2-13.

Something may be obstructing your paper supply. Make sure that the paper can feed smoothly into the printer. Refer to 2-8.

The position of your paper supply may be preventing it from feeding straight into the printer. Position the stack of incoming new paper and outgoing printed paper so that the paper feeds straight. Refer to 2-8.

The supply of paper may be too far from the printer. Position the paper supply so that it is less than a meter away. Refer to

2-8.

Troubleshooting 7-17