Inserting Checks, For multi feed models | Epson TM-S1000 specification

Inserting Checks

For the multi feed models, you can put up to 100 documents in the ASF to be fed automatically.

For the single feed models, put documents in the SF one by one to be fed automatically.

For multi feed models

1 Align the documents neatly on the bottom-right corner as shown in the picture below so that they will be fed one by one.

If the documents are inserted without being aligned, they may not be fed at all, or a paper jam or incorrect feeding of multiple documents may result.

1234567890 1234780

2 Insert documents straight with their faces (the side on which magnetic characters are printed) facing outside into the ASF, as shown in the picture below.

•Be sure to let go of the documents before the scanner starts feeding. Otherwise, there may be a paper skew, paper jam, or MICR reading error.

•Do not open the covers while processing is in progress.

1

234567890

1234780

52

Image 52

Epson TM-S1000 specifications Inserting Checks, For multi feed models

Contents

Setup Product OverviewHandling 411259105 Rev. E Trademarks For Safety Key to Symbols Dealer or a Seiko Epson service center for advice Manual Content Restriction of UseAbout this Manual Aim of the Manual Contents Connecting the Scanner to the Host Computer Application Development InformationPage Features Single Pass ProcessingStandard Equipment Easy Operation Franking Cartridge Interface Product ConfigurationColor Attachments AccessoriesOptions For Multi Feed Models Part Names and FunctionsFor Single Feed Models Power Switch Cover Power SwitchFor All Models Power LED Green LED IndicatorsError LED Orange Document LED Green ConnectorsOffline Processing Modes High-speedConfirmation Overlap Processing speed For 30 Dpm Model For 60 Dpm Model With overlap Confirmation For 90 Dpm Model Reading Operation High-speed mode Confirmation mode Selectable processesFranking process Ejection process Sensors Paper Sensors Eject sensor E Main pocket nearly full sensor FCover Open Sensors Scanner cover open sensor H Other Sensors Franking cartridge sensor JFranking cartridge position sensor K Hopper position sensor M Maintenance Counter Counter Counter type Unit Error Status Recoverable ErrorsError LED flash code Error description Recovery measure Error LED flash code Error description Unrecoverable Errors Error LED flash codeError Error description Compatibility with the TM-J9000/J9100 Product Specifications CPU Dpm documents per minute, dpi dots per inch 25.4 mm Scanner Specifications Jpeg Paper Specifications For multi feed models Front Front Scannable AreaBack Micr Readable Area Area for Electric EndorsementArea for Franking Front or Back Electrical Characteristics Environmental Conditions External Dimensions and Mass MassPage Installing the Scanner Flow of SetupImportant Notes on Installation Connecting the Scanner to the Host Computer Connecting the Power Supply Unit Use the AC adapter. C as the power supply unitPage Download Software and ManualsSoftware Description Manual TM-S1000 Utility Functions of the Utility Handling Turning On/Off Opening the Covers Opening the Scanner Cover Opening the Franker Cover Franking Cartridge Installing and Replacing the Franking CartridgeImportant Notes on the Franking Cartridge Handling Pocket Guide Pulling Out the GuidesASF/SF Guide Flow of Single Pass Processing Processing DocumentsImportant Notes on Processing Documents Inserting Checks For multi feed models For single feed models When the documents are ejected, remove the documents Ejecting Checks Cleaning Cleaning the Image Scanner Cleaning the Micr Unit Do not use sticky cleaning sheets Removing a Paper Jam Preparing for Transport