133
Printing With Epson Drivers for Macintosh |133
Off (No Color Adjustment) to disable color management in the
printer driver. Choose this mode when you use a color-managed
ICC workflow in Photoshop or another software application. See
page 141 for instructions.
Choosing Paper Configuration Options
Follow these instructions if you are using non-Epson media and you need to
fine-tune its performance.
1. Select Paper Configuration from the drop-down menu. You see this
screen:
2. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer’s control panel.
Color Density lets you control the ink saturation level.
Drying Time per Print Head Pass lets you print with non-Epson
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
Drying Time per Page lets you print with non-Epson media and
avoid smearing the ink.
Note: You may need to
change the Color Density
setting if your custom
color profile was created
to optimize D-max and
color gamut.