177
Solving Problems |177
CLEANING ERROR
AUTOMATIC HEAD
CLEANING FAILED
RETRY?
YES
NO
Head cleaning did not clear the
nozzles.
Press to clear the error and run the
head cleaning utility again. If cleaning
doesn’t start, cancel printing from the
computer. Then turn the printer off and back
on again.
CLEANING ERROR
NOT ENOUGH INK.
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
There is not enough ink to
perform cleaning.
Select Yes and replace the cartridge (see
page 157).
CLEANING ERROR
NOT ENOUGH EMPTY
SPACE IN MAINT TANK.
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
There is not enough space in
the maintenance tank to
perform cleaning.
Select Yes and replace the maintenance
tank (see page 166).
COMMAND ERROR
CHECK DRIVER SETTINGS
You may be using the wrong
printer driver.
Damaged data was sent to the
printer or the data has an
incorrect command.
Press to cancel the print job and reset
the printer. Make sure you installed the
correct driver for your printer.
CUTTER UNIT NEARING
END OF SERVICE LIFE.
RECOMMEND REPLACING
THE CUTTER UNIT
The paper cutter may be dull. Replace the paper cutter; see page 162.
FRONT COVER OPEN
CLOSE FRONT COVER
Front cover is open. Close the front cover.
F/W INSTALL ERROR
UPDATE FAILED RESTART
THE PRINTER
Firmware update failed. Restart the printer, then update the
firmware again; see page 55.
INK CARTRIDGE
INK LOW REPLACE INK
CARTRIDGE
The ink cartridge is expended. Replace the ink cartridge; see page 157.
Message Explanation Response