190
190 |Solving Problems
Fixing Paper Eject Problems
If the paper is curled too tightly to eject properly, make sure the paper guides
are attached to the printer. There are two paper guides for the Epson Stylus
Pro 7700 and five for the Pro 9700.
Attach the guides to the bottom of the printer as shown:
Do one of the following:
•If you are feeding paper in front of the printer,
move the guides to the forward position.
•If you are feeding paper backward (under the
printer), gently squeeze the paper guides and
push them to the backward position, as shown
below:
EpsonStylus Pro 7700 EpsonStylus Pro 9700
Note: If banding appears
on your print, leave the
paper guides in the
forward position.