51
Setting Up the Printer |51
For network connection, click the Manual button, select the port you
created for the printer, and click OK.
If you didn’t create a port for the printer, select FILE.
8. When you see the final installation screen, click Exit.
9. Register your printer with Epson, then remove the printer software
CD-ROM.
10. If you need to create a port, see the on-screen Network Guide.
Go to the next section to update the printer firmware, if necessary.
Installing the Software for Macintosh
Follow the steps below to install the software on a Macintosh. For Windows,
see page 49.
1. Turn on your Macintosh and your printer.
2. Insert the printer software CD-ROM into your CD or DVD drive.
3. Double-click the Epson installer icon.
4. Click your printer model.
Note: You can check for a
newer version of your
printer driver on the Epson
support site at
www.epson.com/support.