75
Handling Paper and Other Media |75
Loading Thick Sheets
Make sure you load paper in the portrait orientation (short edge first).
The only exception is paper that is more than 19 mil (0.5 mm) thick and
28.6 inches (728 mm) long, which should be loaded in landscape orientation
(Pro 9700 only).
1. Make sure the printer is turned on and the roll paper cover is closed.
2. Press the lPaper Source button until the Sheet icon appears on the
LCD display.
3. Press the Paper release button.
4. Feed the sheet into the paper slot. Make sure the right and top edges of
the paper are straight and aligned with the horizontal and vertical lines
on the printer.
Note: You may need to
increase the suction by
pressing the u button.
This helps hold the paper
in place during loading
and printing.