Ericsson 7700 Chapter 1: Setting Up the Printer

This chapter includes the following information:

•Unpacking and assembling the Pro 7700 and Pro 9700

•Connecting the power cord

•Installing ink

•Connecting to your computer and a network

•Installing the printer software for Windows or Macintosh

•Updating the printer firmware

•Configuring the printer for a network

Follow these steps to assemble your printer and its stand.

Before you begin, make sure you have sufficient space to set up and use the

printer—at least 12 inches (305 mm) on all sides in addition to the

dimensions shown:

•53.4 × 35.6 inches (1356 × 903 mm) for the EpsonStylus Pro 7700

•73.4 × 52 inches (1864 × 1318 mm) for the EpsonStylus Pro 9700

Chapter 1: Setting Up the Printer

WARNING: Four people are

required to unpack and set

up the printer.

Note: When choosing a

place for the printer, leave

adequate room for easy

access and ventilation.

Avoid locations subject to

direct sunlight, excessive

heat, moisture, or dust.

Also avoid locations near

potential sources of

electromagnetic

interference, such as

loudspeakers, cordless

phones, TVs, or air

conditioners.