Outgoing Calls
2 M2 ÜÛ
Z ÜÛ
Example: To call Bob.
(Anita, Bill and Bob are programmed in the Phone book).
Press and keep pressed.
Anita is shown in the display.
Press again, shortly.
Bill is shown in the display.
Press.
Bob is shown in the display.
Press to call Bob.
Programming a number or function on the R/Message key
You can program a number that you call very often or program a function (depending on system).
Route: Settings » MessageKey » Mess.KeyNo
Enter the number.
Press.
Note: Only one number or function can be programmed. If you change it, the default function to enter your mailbox directly will not work any more. If you want to use the Message Waiting function (default) again, the number to enter the mailbox has to be
34 | DT292 |