Call Forwarding

Important notes when designing your search profiles:

Avoid ring times longer than 45 seconds for your profiles.

Usually the caller hangs up after 3-6 ring signals. If you need a longer ring time, the maximum time is 60 sec.

Consider the time you need to react and answer on each answering position in your profile.

You might need up to 15 seconds to react and answer a call on a desk or cordless phone and 20-25 seconds for a mobile phone.

There must be an answering position at the end of every profile (Voice mail or operator/secretary).

If not, calls might end up unanswered.

Consider what should happen while you are busy on a phone. The available options are:

Follow-me to voice mail

Follow-me to the operator

If an answering machine, a fax or other answering service is used as an early answering position, it might interrupt the searching.

Disconnect the answering service, or design the ring times so they do not affect the searching.

If your system admits just one single personal profile, design the profile only with your 2-3 most frequently used positions.

If you add more numbers, there is a risk that the caller hangs up before a latter position is called.

If your system admits 1-5 personal profiles, design the different profiles to fit your most frequently used positions.

Make sure you use as few answering positions as possible for each profile. Profile examples:

In office

At home

Traveling

Absent/not reachable

DT292

59

Page 59
Image 59
Ericsson manual Office At home Traveling Absent/not reachable DT292