Eton E1 manual Quick Reference Guide, Memory Functions

QUICK REFERENCE GUIDE

QUICK REFERENCE GUIDE
The	3	symbol indicates that the key is to be
pressed within three seconds.
Select normal frequency display (VFO) (page 19 item 20)			•	Press ‘VFO’
Select normal frequency display (VFO) (page 19 item 21,			•	Press ‘FM’, SW, MW or LW softkeys to select FM
22, 23)				Broadcast, Shortwave,AM Broadcast or Long Wave
				bands. When in Shortwave mode, press ‘SW’ two or
				three digit entry from ‘Direct-Key-Input’ keypad for
				Shortwave Meter band designation.
Adjust Frequency (page 21)			• Select Band. Turn ‘TUNING’ knob, Press ‘< SELECT >’
				keys, use ‘Direct-Key-Entry’ keypad.
Select Mode (page 22-25)			•	Press ‘AM’ for displayed ‘AM’
			• Press ‘AM’ again to toggle to ‘AM SYNCH’
			• Press ‘SSB’ to scroll between ‘USB’, ‘LSB’ and DSB
				when ‘AM SYNCH’ is displayed.
			• Press ‘FM’ as required to display ‘FM’.
			• Press ‘SSB’ to select SSB mode. (AM SYNC must be
				off. To turn off, press AM).
Select AM SYNC (page 23)			• With unit in ‘AM’ mode, press ‘AM’ again. ‘AM SYNC’
				will flash and then lock on.
Select Bandwidth (page 19, item 13)			• Press ‘BW’ for displayed ‘7.0', ‘4.0' or ‘2.3' kHz (not
				active in FM).
Select AGC (page 19, item 12)			• Press ‘AGC’ for displayed ‘SLOW’, ‘FAST’, or AUTO (not
				active in FM).
DX (preamplifier) On or Off (page 15 item 16)			• Press ‘DX’ for displayed ‘DX’ or blank.
Set Time (page 52)			• Press ‘MENU’ to display MAIN MENU. Then press ‘3’ to
				display SET CLOCKS display.
			• Press ‘1', set Local time using keypad, and press
				STORE to start clock.
			• Press ‘2', set GMT time using keypad and press
				‘STORE’ to start clock.
			• Press ‘9' to exit SET CLOCKS display
Display GMT or Local Time (page 48)			• Press ‘TIME’ key 3 times.
			• Press GMT or LOCAL softkey to select.
			• Press ‘TIME’ key again to exit menu.
			• Time is always displayed in upper right corner when
				on, and in center of display when off.
					Quick Reference Guide continued > > >

48

E1 MANUAL

QUICK REFERENCE GUIDE continued

Program ON/OFF timers (starting 53)		• Press MENU to activate MAIN MENU
		• Press ‘5' to activate TIMERS menu.
		• Press ‘1' and set TIMER 1 ON time using Keypad.
		• Press ‘STORE’ to save.
		• Press ‘2' and set TIMER 1 OFF time using keypad.
		• Press ‘STORE’ to save.
		• Press ‘3' and set TIMER 1 Memory Channel using key-
		pad and press ‘STORE’ to save.
		• Repeat for TIMER 2 using menu entries 4, 5, and 6.
		• Press ‘9' to exit menu.
Activate (Enabling) Timer (page 56)		• Press ‘TIME’ to activate TIMER 1 menu.
		• Press ‘ENABLE‘ to activate.
		• Press ‘TIME’ again to activate TIMER 2 menu.
		• Press ‘ENABLE’ to activate.
		• Press ‘TIME’ again twice to return to normal operation.
		• TIMER 1 and/or 2 will be displayed below the clock to
		indicate activation.
Lock (or Unlock) Controls (page 56)		• Press and hold ‘CLR/LOCK’ until “LOCK” is displayed
		(extinguishes).
		• Pushbuttons (except POWER) and ‘TUNING’ knob are
		inactive (active).
Display light On/Off (page 57)		• Press ‘LIGHT’ to scroll display lighting through bright,
		medium, dim and off.
Disable Beep (page 25)		• Press ‘MENU’ to enable MAIN MENU.
		• Press ‘2' to enable the AUDIO SETTINGS menu.
		• Press ‘2' to toggle Beep on and off.
		• Press ‘9' to exit menu.
MEMORY FUNCTIONS		• Select frequency, bandwidth, AGC and mode.
•	Store MEMORY Channel (page 26)	• Press ‘STORE’. This will activate MEMORY or COUNTRY
•	Store COUNTRY Channel (page 28)	memory mode.
		• Press MEMORY or COUNTRY to select your preference.
		• Select an empty location using ‘TUNING’ or ‘< SELECT >’.
		• Press ‘STORE’ to save.
		• If in MEMORY mode, use ‘TUNING’ and ‘< SELECT >’ to
		assign name, and press STORE again.
• Recall MEMORY Channel (page 26)		• Press ‘MEMORY’ or ‘COUNTRY’.
• Recall COUNTRY Channel (page 28)		• Use ‘TUNING’ and/or ‘< SELECT >’ to select desired
		memory channel.
Select MEMORY or COUNTRY Channel		• Recall a MEMORY or COUNTRY channel as above.
for T.SCAN (page 51)		• Press ‘TAG’ to mark the channel for T.SCAN.
		• Set SQUELCH to desired level.
		• Press ‘T.SCAN’ to activate scan.
•	Delete a MEMORY Channel (page 28)	• ‘Select a MEMORY or COUNTRY channel to delete as
•	Delete a COUNTRY Channel (page 30)	described above.
		• Press and hold ‘DELETE’ for 3 seconds. A high pitched
		beep will be heard and listed channel will be deleted.
		Quick Reference Guide continued > > >
		49