Evolution Technologies 222 instruction

SECTIONTWO

Unpacking and Placement

This section describes the procedures for safely unpacking and placing your Evolution 222 preamplifier. The Evolution 222 preamplifier and accessories are shipped in 1 carton.

Opening the Evolution 222 Shipping Carton

The Evolution 222 shipping carton measures 22.3 in. (56.6 cm) wide by 23.5 in. (59.7 cm) high by 16.2 in. (41.1 cm) deep.

Preamplifier Chassis. This measures 17.3 in. (43.8 cm) wide by 3.8 in. (9.7 cm) high by 18.3 in. (46.4 cm) deep, and weighs 22 lbs. (10 kg).

To Remove the Preamplifier from the Shipping Carton

1. Open the shipping carton and remove the top layer of foam. The carton con- tains these items:

1 Preamplifier chassis

1 IEC Connector (AC Power) cord

1 Remote control

2 AAA-size 1.5 Volt batteries for the remote 1 T-10 Torx wrench for the remote control 1 Owner’s Reference

2. Carefully remove the preamplifier and accessories from the box.

3. Place the preamplifier in a safe location, and remove the protective plastic wrapping.

continued

Image 11

Evolution Technologies 222 manual

Contents

Evolution Important Safety Instructions Contents List of Illustrations Letter from Dan D’Agostino Features Evolution 222 Features and Technology Cast Basics Voltage Signal Transmission Traditional Audio SystemHow Cast and Krell Current Mode Interact Revolutionary Krell Cast Technology Best Musical Performance Cast Cable ConstructionEvolution Cast Operation Definition of TermsInputs and Outputs Technology Krell Current ModePage AC Power Guidelines Placement Quick Start Connecting the Evolution 222 to Your System Operating the Evolution Selectors Anatomy of the Evolution Remote Functions on the Front Panel PowerFront Panel Description Chassis Preamplifier Functions DisplayNavigate/Customize Level Control Knob or Level Keys Level Control Evolution 222 Remote Control Balance Functions Remote Control DescriptionBattery Installation and Removal Amplifier Functions Compact Disc and DVD Functions Evolution 222 Back Panel Outputs ConfigurationsBack Panel Description Inputs 24 12 VDC In/Out 12 V Trigger Remote Connections on the Back Panel22 RS-232 23 RC-5 IEC Power Cord Receptacle Phono Stage ConnectorPhono Power Port Input and Output Connections Connecting the Evolution 222 to Your SystemXLR Pin Configuration Connection Steps To Turn Off The System Evolution 222 OperationOn/Off and Stand-by Operation Navigation Conventions Volume Knob or Level KeysCustomizing the Evolution AC Mains Menu Functions Balance input trim Balance channel Menu Button or Key Enter or exit the menu Display Info Input Name Input Level Trim Input Trigger Input Phase IR Out Control Evolution 222 responds to 12 V input trigger commands Mute Link Control can Link Output Trigger Recall RC-5 Control Save RS-232 Control Theater Mode Volume Display Troubleshooting System Noise Warranty Page To contact the Krell Service Department Return Authorization Procedure Inputs Specifications Connair Road