RC-5 Control
This function enables you to change the link transmit status of the Evolution 222. The options are:
Enter the menu, then:
1.Use the level control knob on the preamplifier front panel or up and down keys (14) on the remote control to select:
2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: LINK
TRANSMIT.
3.Use the level control knob or the up and down keys to select the desired
option: LINK TRANSMIT or LINK RECEIVE.
4.Press the enter button or key to confirm the selection. The front panel display
reads:
Recall
This function enables you to access factory default settings or your own saved settings. The options are:
Enter the menu, then:
1.Use the level control knob on the preamplifier channel front panel or up and down keys (14) on the remote control to select: RECALL.
2.Press the enter button on the preamplifier channel front panel or the enter key
(6) on the remote control. The front panel display (3) shows the default mode:
FACTORY.
3.Use the level control knob or the up and down keys to select the desired
option: FACTORY, or SAVED.
4.Press the enter button or key to confirm the selection. The front panel display
reads: RECALL.
FACTORY
Recalls the factory settings.
SAVED
Recalls settings previously stored in memory using the SAVE function. See also Save, on the next page.
continued
