Operating the Evolution | Evolution Technologies 222 guide

(SECTION THREE: Quick Start)

Operating the Evolution 222

After the Evolution 222 is connected to your system and to AC power, and the front panel display has stopped scrolling, begin operation:

1.Press the power button (1) on the front panel, or the remote control power key. The standby/power LED turns blue. The display shows the factory default input: S-1, and level: -INF. The Evolution 222 is now in the operational mode.

2.With the preamplifier output muted, or the volume fully attenuated, select a source manually using the front panel input select buttons (8, 9, or 10) or the remote input select keys. Start playing the source. Use the level control knob (14) or the remote level keys to set the volume to a comfortable level.

3.To return the preamplifier to the stand-by mode, press the power button (1) or remote power key.

Krell recommends leaving the Evolution 222 in the stand-by mode when it is not playing music.

Image 14

Evolution Technologies 222 manual Operating the Evolution

Contents

Evolution Important Safety Instructions Contents List of Illustrations Letter from Dan D’Agostino Evolution 222 Features and Technology Features Revolutionary Krell Cast Technology Voltage Signal Transmission Traditional Audio SystemHow Cast and Krell Current Mode Interact Cast Basics Best Musical Performance Cast Cable ConstructionEvolution Cast Operation Definition of TermsInputs and Outputs Krell Current Mode TechnologyPage Placement AC Power Guidelines Connecting the Evolution 222 to Your System Quick Start Operating the Evolution Anatomy of the Evolution Selectors Chassis PowerFront Panel Description Remote Functions on the Front Panel Preamplifier Functions DisplayNavigate/Customize Level Control Level Control Knob or Level Keys Evolution 222 Remote Control Amplifier Functions Remote Control DescriptionBattery Installation and Removal Balance Functions Compact Disc and DVD Functions Evolution 222 Back Panel Inputs ConfigurationsBack Panel Description Outputs 23 RC-5 Remote Connections on the Back Panel22 RS-232 24 12 VDC In/Out 12 V Trigger IEC Power Cord Receptacle Phono Stage ConnectorPhono Power Port Input and Output Connections Connecting the Evolution 222 to Your SystemXLR Pin Configuration Connection Steps To Turn Off The System Evolution 222 OperationOn/Off and Stand-by Operation Navigation Conventions Volume Knob or Level KeysCustomizing the Evolution Menu Functions AC Mains Balance channel Balance input trim Display Menu Button or Key Enter or exit the menu Info Input Level Trim Input Name Input Phase Input Trigger Evolution 222 responds to 12 V input trigger commands IR Out Control Link Control can Link Mute Output Trigger RC-5 Control Recall RS-232 Control Save Theater Mode Volume Display Troubleshooting System Noise Warranty Page Return Authorization Procedure To contact the Krell Service Department Specifications Inputs Connair Road