Menu Functions, AC Mains | Evolution Technologies 222 manual

OFF, ON.

(SECTION SEVEN: Customizing the Evolution 222 continued)

Menu Functions

AC Mains

This function enables you to operate the Evolution 222 from a switched AC outlet. If AC Mains is set to ON, the preamplifier turns on immediately, by-passing stand- by. Thereafter, you may switch the preamplifier to and from stand-by, using the power button or pwr key (1). The options are:

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or up and down keys (14) on the remote control to select: AC MAINS.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: OFF.

3.Use the level control knob or the up and down keys to select the desired option: OFF or ON.

4.Press the enter button or key to confirm the selection. The front panel display

reads: AC MAINS.

OFF

The Evolution 222 switches to stand-by mode, when it detects AC power.

ON

The Evolution 222 turns on immediately, bypassing the stand-by mode, when it detects AC power.

Image 30

Evolution Technologies 222 manual Menu Functions, AC Mains

Contents

Evolution Important Safety Instructions Contents List of Illustrations Letter from Dan D’Agostino Evolution 222 Features and Technology Features Revolutionary Krell Cast Technology Voltage Signal Transmission Traditional Audio SystemHow Cast and Krell Current Mode Interact Cast Basics Cast Cable Construction Evolution CastBest Musical Performance Definition of Terms Inputs and OutputsOperation Krell Current Mode TechnologyPage Placement AC Power Guidelines Connecting the Evolution 222 to Your System Quick Start Operating the Evolution Anatomy of the Evolution Selectors Chassis PowerFront Panel Description Remote Functions on the Front Panel Display Navigate/CustomizePreamplifier Functions Level Control Level Control Knob or Level Keys Evolution 222 Remote Control Amplifier Functions Remote Control DescriptionBattery Installation and Removal Balance Functions Compact Disc and DVD Functions Evolution 222 Back Panel Inputs ConfigurationsBack Panel Description Outputs 23 RC-5 Remote Connections on the Back Panel22 RS-232 24 12 VDC In/Out 12 V Trigger Phono Stage Connector Phono Power PortIEC Power Cord Receptacle Connecting the Evolution 222 to Your System XLR Pin ConfigurationInput and Output Connections Connection Steps Evolution 222 Operation On/Off and Stand-by OperationTo Turn Off The System Volume Knob or Level Keys Customizing the EvolutionNavigation Conventions Menu Functions AC Mains Balance channel Balance input trim Display Menu Button or Key Enter or exit the menu Info Input Level Trim Input Name Input Phase Input Trigger Evolution 222 responds to 12 V input trigger commands IR Out Control Link Control can Link Mute Output Trigger RC-5 Control Recall RS-232 Control Save Theater Mode Volume Display Troubleshooting System Noise Warranty Page Return Authorization Procedure To contact the Krell Service Department Specifications Inputs Connair Road