Evolution Technologies 222 manual Customizing the Evolution, Navigation Conventions

SECTION SEVEN

Customizing the Evolution 222

The Evolution 222 preamplifier easy-to-use menu allows you to configure the fol- lowing functions. You can also use the menu to review version information about the software, hardware, and firmware installed in the Evolution 222:

AC Mains, page 30	Input Phase, page 35	Recall, page 39
Balance (channel) page 31	Input Trigger, page 35	RS-232 Control, page 40
Balance (input trim), page 31 IR Out Control, page 36		Save, page 40
Display, page 32	Link Control, page 37	Theater Mode, page 41
Info, page 33	Mute, page 37	Volume Display, page 42
Input Level Trim, page 34	Output Trigger, page 38
Input Name, page 34	RC-5 Control, page 39

Navigation Conventions

Navigating the Evolution 222 menu is straightforward and consistent throughout, using four functions and the menu option BACK.

5 Menu Button or Key

To enter the menu, press the menu button on the preamplifier front panel or the menu key on the remote control. Once you are in the menu, you can press the menu button or key to exit the menu.

14 Volume Knob or Level Keys

Use the volume knob on the preamplifier front panel or the up and down keys on the remote control to scroll forward and backward through the menu hierarchy. Each menu list is a continuous loop.

6 Enter Button or Key

Press the enter button on the preamplifier front panel or the enter key on the remote control to select a function or a configuration option, and to confirm a selection.

3 Front Panel Display

The display shows the active function and configurable options.

BACK

Select back to scroll backwards up the menu hierarchy, or to exit a menu option without confirming it.

The first list you see in the menu is the list of configurable functions. Select a con- figurable function to view a submenu: the list of options that configure the func- tion. You can configure some options as well, using a second submenu.

continued