Evolution Technologies 222 manual Input Level Trim, Input Name

(SECTION SEVEN: Customizing the Evolution 222 continued)

Input Level Trim

This function enables you to select an input offset for a particular input. The options are: +/-6 dB, in 1 dB increments.

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or the up and down keys (14) on the remote control to select: INPUT LEVEL TRIM.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: B-1.

3.Use the level control knob or the up and down keys to select the desired input:

B-1, B-2, S-1, S-2, S-3, C-1, C-2, or TAPE.

4.Press the enter button or key. The front panel display shows the default mode:

0 dB.

5.Use the level control knob or the up and down keys to select the desired trim option: +/-6 dB, in 1 dB increments.

6.Press the enter button or key to confirm the selection. The front panel display shows the selected input.

Input Name

Input Name Options

AUX, AUX1, AUX2, AUX3 B-1, B-2, B-3, BYPC-1 C-2, C-3, CABLE, CD, CD1, CD2, CD-R, COMP

DAC, DAT, DCC, DISC, DISC 1, DISC 2, DISC 3, DSS, DVD, DVD1, DVD2, DVD3, DVD-A

EQ, GAME, HI-8

LD, LD1, LD2, LINE 1, LINE 2, LINE 3, LINE

MDISC, MIXER, MON

PHONO, PHON1, PHON2,

PROC

S-1, S-2, S-3, S-4, SACD, SAT, SRC1, SRC2, SRC3, SURR, S-VID

TAPE1, TAPE2, TAPE3, TAPE, TEST, THR, TUNER, TUNR1, TUNR2, TV,

VCR, VCR1, VCR2, VCR3, VDISC, VIDEO, VID1, VID2, VID3

8MM, 8TRK

This function enables you to select an input name for each input. The input name options are listed in the left margin, on this page.

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or up and down keys (14) on the remote control to select: INPUT NAME.

2.Press the enter button on the preamplifier front panel or the enter key (6) on the remote control. The front panel display (3) shows the default mode: B-1.

3.Use the level control knob or the up and down keys to select the desired input:

B-1, B-2, S-1, S-2, S-3, C-1, C-2, or TAPE.

4.Press the enter button or key. The front panel display shows no characters.

5.Use the level control knob or the up and down keys to select the desired input name, from the input name options listed at left.

6.Press the enter button or key to confirm the selection and return to the input list, in Step 3. The front panel display shows the input name.

To select input names for other inputs, repeat Steps 3 and 4.