Operation, cont’d
Example 1: Creating a set of ties
In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the front panel indications that result from your action.
NThis example assumes that there are no ties in the current configuration. 1. Clear all selections: Press and release the Esc button.
Press the Esc button to clear all selections.
C O N T R O L
ENTER PRESET | VIEW | ESC |
The button flashes once.
2. Select an input: Press and release the input 5 button.
Press and release the Input 5 button.
The button lights green.
INPUTS
1 
2 
3 
4 
5 
6 
7 
8 
15
16 
17 
18 
19 
20 
21 
22 
23 
24 
31 
32 
3. Select the outputs: Press and release the output 3, output 4, and output 8 buttons.
Press and release the Output 3, Output 4, and Output 8 buttons. The buttons blink green to indicate that the selected input will be tied to these outputs.
OUTPUTS
1 
2 
3 
4 
5 
6 
7 
8 
15
16 
17 
18 
19 
20 
21 
22 
23 
24 
31 
32 
C O N T R O L
ENTER | PRESET | VIEW | ESC |
|
|
The Enter button blinks green to indicate the need to confirm the change.
NYou can cancel the entire set of ties at this point by pressing and releasing the Esc button. The Esc button flashes once.
4. Confirm the change: Press and release the Enter button.
Press the Enter button to confirm the configuration change.
ENTER
All input buttons and output buttons return to unlit or background illumination.
The Enter button returns to unlit or background illumination.
