Extron electronic 6400s manual X1 ,X# 1 ,X# 2 , ... X# n, # %

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description

Save, recall, and directly write presets (continued)

Read room outputs	EX*MR}	X1),X#1,X#2, ... X#n]
Example:	E3MR}	Class 1,01,02,08,09]	Outputs 1, 2, 8, and 9 are
			assigned to room 3, which
			named “Class 1”.

Recall room preset	X**X(.	RmmX*•RprX(]
Directly write a room	E+X**X(PX@*X#!X@*X#%X@*X#$ ... X@*X#!}
preset

RmmX*•SprX(]

Command character is a period.

Enter as many ties as are valid for this configuration. The ! tie command, & tie, and % tie commands are all valid and equivalent.

Example:

Esc+7*3P12*7&11*5&4*5%6*6! Rmm07•Spr03]

Brackets are shown to separate ties for clarity only. Create preset 3 for room 7, which ties input 12 to output 7, input 11 to output 5, input

4 to output 5, and input 6 to output 6.

View ties, mutes, and presets

View output tie	X#&	X@]
Example:	15&	27]
View output tie	X#%	X@]
Example:	7%	02]
View output mutes	EVM}	X$1, X$2, ... X$n]

Input 27 is tied to output 15.

Input 2 is tied to output 7.

Each X$response is the mute status of an output, starting from output 1. n is the highest-numbered output.

NX*= Room # (for room presets) X1)= Name

X#= Output number X(= Room preset # X@= Input number X$= Mute

10 max. (Each can have up to 10 presets (X() assigned.) 12 characters maximum for input and output names 01 – 64

00 – 10 (00 = current configuration for room)

00 – 64 (00 = untied)

0 = not muted, 1 = muted

4-12 Fiber Matrix 6400 Switcher • Programmer’s Guide