Extron electronic 6400s manual Command/Response Table for IP-Specific SIS Commands

Command/Response Table for IP-Specific SIS Commands

Symbol definitions

X3) = Matrix name (Up to 240 alphanumeric characters)

NThe following characters are invalid in the name: {space} ~ , @ = ` [ ] { } < > ‘ “ ; : \ and ?.

X3! =	Default name	Fiber-Matrix-64- + last 3 pairs of MAC address
X3@ =	Time and date (for set)	In the format: MM/DD/YY•HH:MM:SS where:
		MM = month: 01 (January) through 12 (December)
		DD = day: 01 through 31
		YY = year: 00 through 99
		HH = hour: 00 through 23
		MM = minutes: 00 through 59
		SS = seconds: 00 through 59
X3# =	Time and date (for read)	In the format: Day,•DD•Mmm•YYYY•HH:MM:SS where:
		Day = weekday: Mon through Sun
		DD = date: 01 through 31
		Mmm = month: Jan through Dec
		YYYY = year: 2000 through 2099
		HH = hour: 00 through 24
		MM = minutes: 00 through 59
		SS = seconds: 00 through 59
X3$ =	GMT offset	–12.0 through +14.0. Hours and minutes removed from GMT
X3% =	Daylight Saving Time	0 = Daylight Saving Time off/ignore
		1 = Daylight Saving Time on (northern hemisphere)
		2 = Daylight Saving Time on (Europe)
		3 = Daylight Saving Time on (Brazil)
X3^ =	IP address	###.###.###.###
X3& =	Hardware (MAC) address	##-##-##-##-##-##
X3* =	Number of open connections	0 – 255
X3( =	Password	12 alphanumeric characters

NThe following characters are invalid in passwords: {space} + ~ , @ = ` [ ] { } < > ‘ “ ; : \ and ?.

X4) = Domain name Standard domain name rules apply (for example: xxx.com)

N The following characters are invalid in a domain name: {space} + ~ , = ` [ ] { } < > ‘ “ ; : \ and ?. The @ character is acceptable only as the lead-in to the domain name (such as @extron.com).

X4! =	E-mail account
X4@ =	E-mail address
X4# =	Notification selections, part 1
X4$ =	Notification selections, part 2	If X4#= I, then
		If X4#= F, then
		If X4#= P, then

65 - 72. 65 = e-mail recipient 1, 66 = 2, 67 = 3, ... 72 = recipient 8 Typical e-mail address format (for example: nnnn@xxx.com)

I = inputs F = fans P = power supply

X4$= 00 (all inputs), or 01 through 64 (input 1 through input 64) X4$= 00 (both fans), 01 (fan 1), or 02 (fan 2)

X4$= 00 (both power supplies [PSs]), 01 (primary PS), or 02 (redundant PS)

X4%	=	Notify when?	0	= no response	1 = fail/missing	2 = fixed/restored
			3	= both 1 & 2	4 = suspend
X4^ =		DHCP	0 =off, 1 = on
X4& =		Port #	00 (all ports), 01 (rear panel), 02 (front panel), 03 – 99
X4*	=	Baud rate	9600, 19200, 38400, 115200
X4( =		Parity	odd, even, none, mark, space (Only the first letter required.)
X5)	=	Data bits	7, 8
X5! =		Stop bits	1, 2
X5@ =		Port type	0	= RS-232, 1 = RS-422, 2 = RS-485
X5# =		Verbose mode	0	= clear/none (default for Telnet connection)
			1	= verbose mode (default for RS-232/RS-422 connection)
			2	= tagged responses for queries
			3	= verbose mode and tagged for queries

NIf tagged responses is enabled, all read commands return the constant string and the value as the set command does (for example, the read matrix name command ECN}, returns Ipn•X3)]).

X5$ = Port timeout interval (in 10-sec. increments)	1 (= 10 seconds) – 65000 (default is 30 = 300 seconds = 5 minutes)
	Fiber Matrix 6400 Switcher • Programmer’s Guide 4-17