Extron electronic 6400s manual Example 5 Grouping inputs and outputs

Example 5: Grouping inputs and outputs

In the following example, several switcher inputs and outputs are assigned to groups. The steps show the front panel indications that result from your action.

1. Clear all selections: Press and release the Esc button.

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button flashes once.

2. Select I/O Group mode: Press and hold the Input 1 and Output 1 buttons for approximately 2 seconds and then release the buttons.

Press and hold the Input 1 button and Output 1 button.

1 2 17 18

1 2 17 18

Release the Input 1 button and Output 1 button.

1

2 seconds

Ungrouped input and	1
output buttons light.

3. Select an I/O group: Press and release the Enter button to select group 1.

Press and release the Enter button to select group 1.

The button lights amber to indicate the selection.

C O N T R O L

ENTER PRESET

VIEW

ESC

Group # 1 2 3 4

Fiber Matrix 6400 Switcher • Operation 3-19