Extron electronic 6400s manual EX**X*X#*1VC X@nX@n+1...X@n+15Vid, X1! 1 X1! 2 X1! 3 ...X1, X1@

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description

View ties, mutes, and presets (continued)

View global preset configuration

Command description: Response description:

Example (8 x 8 matrix):

EX&*X#*1VC} X@n•X@n+1•...•X@n+15•Vid]

Show preset X&’s configuration. Show the input tied to 16 sequential outputs, starting from output X#. n is the highest- numbered input.

preset # (X&)*starting output # (X#)*1VC

input # (X@) tied to X#•X@tied to X#+1•X@tied to X#+2• ... •X@tied to X#+15•Vid] E23*1*1VC}

input 8 tied to output 4
input 2 tied to output 3	no tied input outputs do not exist

Response = tied input:	08•08•02•08•08•01•00•00•--•--•--•--•--•--•--•--•Vid
Output:	1	2	3	4	5	6	7	8	09 10 11 12 13 14 15 16

Each position shown in the response is an output: left = output 1, right = output 16. (Outputs 9 through 16 are not present on this Fiber Matrix.) The number in each position is the input tied to that output.

In this example, video input 8 is tied to outputs 1, 2, 4, and 5; input 2 is tied to output 3; and input 1 is tied to output 6. No inputs are tied to outputs 7 and 8.

NEX&*1*1VC}where X&= 0 returns the switcher’s current video configuration.

View room preset configuration

Command description: Response description:

EX**X(*X#*1VC} X@n•X@n+1•...•X@n+15•Vid]

Show room X*, preset X1!’s configuration. Show the input tied to up to 16 outputs assigned to room X*. n is the highest-numbered input.

room # (X*)*room preset # (X()*starting output # (X#)*1VC

input # (X@) tied to X#•X@tied to X#+1•X@tied to X#+2• ... •X@tied to X#+15•Vid]

List input link detection and SDI/HD-SDI output rate

View all input connections	0LS	X1!1 X1!2 X1!3...X1!64]								Each X1!response is the
										connection status of an
										input, starting from input 1.
Example:	0LS	no input detected input detected
		Response Status: 0 0 0 1 1 1 0 . . . 0
		Input:	1	2	3	4	5	6	7		64
List individual SDI/HD-SDI	X#LS	X1@]								Show output rate X1@in
output rate										Mbps for output X#. (If
										there is no connection for
										the specified output, 0000 is
										displayed.)

N X&= Global preset #	00		– 32	(00 = current configuration)
X#= Output number	01		– 64
X@= Input number	00		– 64	(00 = untied)
X*= Room # (for room presets)	10 max. (Each can have up to 10 presets (X(s) assigned.)
X(= Room preset #	00		– 10	(00 = current configuration for room)
X1!= Connection status	0	= no input connected
X1@= Output rate:	1	= input connected
	nnnn = actual rate (in megabits per second)

0000 = no connection or rate mismatch

- - - - = bypass mode

Fiber Matrix 6400 Switcher • Programmer’s Guide 4-13