Extron electronic Extender Series Installation, Extron Extender AKM MAAP, Installation, cont’d

Installation, cont’d

PRELIMINARY

Other adapter plates must be ordered separately. They also must be attached to the faceplate and cabled before the line driver is installed in the wall or furniture. The screws needed for installing the adapter plates are built into the plates, so no additional screws are needed.

1. Remove the blank plates from the Extender by unscrewing the nuts that fasten the plates to the faceplate.

	2.	Insert the adapter
		plate screws
		through the holes
		in the faceplate.	A
			UDIO IN
		Attach the adapter	COMPU	TER IN			Adapter Plate
		plates to the
		faceplate with the
		provided captive					#4-40 Nut with
		washers and #4-40					Captive Washer
		nuts.			EXTENDER	WM	AAP
	3.	Attach the output
			Extender WM AAP
		cables to the rear
			(up to 4 plates)
		connectors of the
		adapter plates. Soldering is required for some connectors.
		Attach foil and braided shields to ground connections.
F	Opening for Mini Architectural Adapter Plates (MAAPs) —
	The Extender AKM MAAP can have up to three optional MAAP
	adapter plates attached here at one time to allow for a variety of
	types of audio/video connectors or another device to be added
	to the faceplate.
	One double-size and one single-size blank plate are included
	with the Extender AKM MAAP to cover unused spaces. Other
	adapter plates must be ordered separately. They also must be
	attached to the faceplate and cabled before the line driver is
	installed in the wall, floor box, or furniture. The screws needed
	for installing the adapter plates are included with the MAAPs,
	so no additional screws are				#4 - 40 Screws
	needed.

Refer to the picture at right and the following steps.

1. Insert the MAAP into the Extender AKM MAAP’s faceplate opening.

2. Using an Allen wrench, secure the MAAP to the faceplate with the provided machine screws.

Extron

Extender AKM MAAP

Line Driver

2-8 Extender Series • Installation