Comb/Trap Filter selects either the comb or trap filter (only available with composite video). The comb filter electronically provides excellent Luma/Chroma separation (separates the color from the picture signal). This greatly reduces
The trap filter extracts luminance from the picture. The trap filter is usually the preferred setting when you are running signals from a VCR (as composite video). You may wish to compare both settings to determine which is best for your application.
Neither filter has any effect on
Reset Video resets all video settings to factory default (for current input only).
Audio menu
The IN1403 allows you to manually adjust the bass, treble, and balance settings. To do so
1.Press the desired Input Select button.
2.Press MENU.
3. | Press the | or | button (if necessary) to reach the input menu. | |
4. |
|
| ||
Press ENTER. |
|
| ||
5. | Use the | and | buttons and the ENTER key to select the setting you wish to adjust. | |
6. |
| |||
Press ENTER to save once you’ve optimized the setting for the current input. | ||||
The following audio adjustment parameters can be controlled via the
While
Bass increases/decreases the lower frequencies of the audio signal.
Range: 6 to 27
Factory Default Setting: 16 (0.0dB)
Operation:
Press button to increase the bass frequencies.
Press button to decrease the bass frequencies.
Treble increases/decreases the higher frequencies of the audio signal.
Range: 8 to 25
Factory Default Setting: 16 (0.0dB)
Operation:
Press button to increase the treble frequencies.
Press button to decrease the treble frequencies.
Balance shifts the audio balance toward the right or left audio channels.
Range: 0 to 31
Factory Default Setting: 16
Operation:
Press button to move the balance toward the right channel.
Press button to move the balance toward the left channel.
Reset Audio Settings reset all audio settings to factory default (for current input only)
10 | IN1403 User’s Manual |
