IN1403 User’s Manual 25
Problem: The image on the display device is cropped on the righ t side.
• Solution 1: Reduce the output H-Position to line up the image on the display device.
Use the blue screen.
• Solution 2: Adjust the monitor position or size controls to fit the image on the display
device. Use the blue screen.
Problem: The image on the display device is cropped on the top.
• Solution 1: Increase the output V-Position to line up the image on the display device.
Use the blue screen.
• Solution 2: Adjust the monitor position or size controls to fit the image on the display
device. Use the blue screen.
Problem: The image on the display device is cropped on the bottom.
• Solution 1: Reduce the output V-Position to line up the image on the display device. Use
the blue screen.
• Solution 2: Adjust the monitor position or size control to fit the image on the display
device. Use the blue screen.
Problem: The display device has a double image.
• Solution: The IN1403 cannot separate multiple signal for mats. Make sure that only one
signal is connected to each input.
Problem: The image on the display device is black & white (no co lor).
• Solution: Set the input signal format to match the input signal connected to the rear of
the unit.
Problem: The picture on the display device has hooking along the top.
• Solution 1: Increase the input horizontal tracking to compensate for poor quality video
signals, such as from a VCR.
• Solution 2: The display device may need different sync serrations. Choose a different
output sync from the sync format menu.
Problem: The image is frozen.
• Solution: Freeze is activated. Press FREEZE to deactivate the freeze frame feature.
Problem: The image on the display device is the wrong shape.
• Solution: The input aspect ratio is set incorrectly. Adjust the input aspect ratio to match
the input video signal.
Problem: The image on the display device appears fuzzy.
• Solution 1: Adjust the video sharpness until the image regains its det ail.
• Solution 2: Adjust the video noise filter until the image is sharp.
• Solution 3: Change the comb or trap filter setting (applicable only in composite video
mode).
Problem: The Output Resolution will not decrease.
• Solution: The IN1403 can only scale up. Resolutions that would result in scaling down
are not available.