Command

ASCII (Telnet)

URL Encoded (Web)

Response

Additional description

 

(host to unit)

(host to unit)

(unit to host)

 

Firmware version, part number and information requests

NIn a query response, an asterisk (*) after the version number indicates the version that is currently used.

A question mark (? or ?.??) indicates that the factory default firmware is the only firmware loaded in the IPL T S unit.

A carat (^) indicates the version of firmware that should be running, but, since a mode 1 reset was performed, the factory default firmware version is loaded and running instead. An exclamation point (!) indicates that the firmware is corrupted.

NResponses to commands differ depending on which, if any, verbose response mode the IPL T S device is in. See the CV command (EX2@ CV}) under IP setup commands later in this table.

Query firmware

Q or 1Q

Q or 1Q

X1! ]

version

 

 

or

Ver01*X1! ]

Example:

1Q

1Q

1.01

 

 

 

or

Ver01*1.01

Query verbose

0Q

0Q

Sum of responses from 2Q-3Q-

firmware version

 

 

4Q]

information

 

 

or

Ver00*sum of responss from

 

 

 

2Q-3Q-4Q]

Show the IPL T S unit’s firmware version (X1!) to two decimal places. This query yields the number of the currently running version of the user-updatable firmware.

Show the bootstrap, factory-installed, and updated firmware versions.

See 2Q, 3Q, and 4Q below.

IPL

Example:

0Q

0Q

1.03-1.00(1.18-IPL Series -Thu, 20 Jan 2005 09:41:47 GMT)-1.01*(1.31-IPL Series -Tue, 14 Jun 2005 00:54:58 GMT)]

T S Series •

Query bootstrap

2Q

2Q

firmware version

 

 

Example:

2Q

2Q

Query factory

3Q

3Q

firmware version

 

 

X1! ]

or Ver02*X1! ]

1.03 ]

X1! (plus Web ver.-desc-UL

date/time)]

or Ver03*X1! (plus Web ver.- desc-UL date/time)]

The bootstrap firmware is not user- replaceable, but you may need this information during troubleshooting.

Factory-installed firmware is different from the bootstrap firmware, but it is also not user- replaceable. This firmware was installed at the factory; it is the version the controller reverts to after a mode 1 reset (see ch. 2).

Example:

3Q

3Q

1.00(1.18-IPL Series

-Thu, 20 Jan 2005 09:41:47 GMT) ]

Communication and Control 4-9

Query updated

4Q

4Q

firmware version

 

 

Example:

4Q

4Q

 

 

In this example the factory firmware version

 

 

is 1.00 and the IP Link kernel version is 1.18

 

 

for the IPL T S unit, dated 20 January 2005.

X1! (plus Web ver.-desc-UL

Use this command to find out which version

date/time)]

 

of the firmware, if any, was uploaded into

or Ver04*X1! (plus Web ver.-

the controller after it left the factory.

desc-UL date/time)]

 

 

1.01*(1.31-IPL Series

-Mon, 28 Feb 2005 23:16:55 GMT) ]

In this example the current firmware version is 1.01, the IP Link kernel version is 1.31, for the IPL T S device, dated 28 February, 2005.

Page 49
Image 49
Extron electronic IPL T S Series X1! , Communication and Control, Firmware version, part number and information requests

IPL T S Series specifications

The Extron IPL T SFI244 is a sophisticated control system that is designed to streamline the management and operation of audiovisual equipment in a variety of environments, including conference rooms, classrooms, and auditoriums. This model falls under the IPL T S Series, renowned for its superior performance and user-friendly interface, making it a popular choice for integrators and users alike.

One of the standout features of the IPL T SFI244 is its advanced interface. It boasts an intuitive touch panel that enables users to manage multiple devices from a single control point, significantly simplifying the AV experience. The system supports a wide range of functions, including source selection, volume control, and the management of lighting and screen mechanisms. This centralized control helps to enhance collaboration and communication, particularly in educational and corporate settings.

The IPL T SFI244 integrates seamlessly with a variety of Extron technologies, including the GlobalViewer Enterprise, providing real-time monitoring and management capabilities. This web-based software solution gives administrators the ability to control AV systems remotely, ensuring optimal performance and minimizing downtime.

Another key characteristic of the IPL T SFI244 is its versatility. It incorporates various input and output options, such as HDMI, VGA, and audio connections, to accommodate different audiovisual equipment. This flexibility allows for easy integration into existing setups, catering to diverse applications and user preferences.

In terms of design, the IPL T SFI244 is engineered with reliability and durability in mind. It is equipped with features that enhance its performance in professional environments, including programmable button layouts that can be customized by users. This personalization ensures that the control system meets specific operational requirements, further enhancing the user experience.

Furthermore, the IPL T SFI244 is built with energy efficiency in mind, utilizing technologies that reduce power consumption without compromising performance. This eco-friendly approach not only supports sustainability initiatives but also contributes to long-term cost savings for organizations.

In summary, the Extron IPL T SFI244 is a comprehensive control solution that combines advanced technology, user-friendly features, and robust performance. Its ability to integrate with various AV equipment, coupled with its customizable interface and reliability, makes it an excellent choice for a wide range of applications, paving the way for more efficient and effective audiovisual management.