Extron electronic ISM 182 Command/response table for special function SIS commands, Delay times

Programmer’s Guide, cont’d

Command/response table for IP SIS commands

Command	ASCII Command				Response			Additional description
	(host to switcher)				(switcher to host)
Set ISM name (location)				CN	Ipn•
	Esc		X30				X30
Read ISM name (location)	Esc	CN			X30
Set GMT/date				CT	Ipt•
	Esc		X31			X32

The date and time entered should be Greenwich Mean Time (GMT).

Read GMT/date

Set IP address

Esc	CT			X32
	•		CI	Ipi•		The switcher sends the response,
Esc		X33			X33
						but the host may not receive it.

Read IP address

Read hardware address

Read # of open connections

Set administrator password

Read administrator password

Set user password

Read user password

Esc CI	X33
Esc CH	X35
Esc CC	X36
Esc • X34 CA	Ipa X34
Esc CA	X34
Esc • X34 CU	Ipu X34
Esc CU	X34

When the computer is connected to the switcher via the RS-232 link, the Admin and User password fields are not masked. If a password has been inadvertently changed to an unknown value, you can look up and, if desired, change a password in this window without knowing the current password.

Command/response table for special function SIS commands

The syntax for setting a special function is Xn * X? # where Xn is the value or variable (such as 35 in the first example below), X? is the function number (such as “set RGB delay” in the first example below), and # is the execute command. To view a function’s setting, use X? # where X? is the function number.

Command	ASCII Command	Response	Additional description
	(host to switcher)	(switcher to host)
Delay times

RGB delay (Triple-Action Switching)

X2 * X20 *3#

X2	Dly	X20	Switching delay of the selected
			input to the selected output.
			Adjustable in 0.01 second steps
			up to 50 = 5.0 seconds. 0 = 0.0
			seconds (default), 1 = 0.1
			seconds, 2 = 0.2 seconds, and so
			on.

Example:	1*35*3#	1Dly35	RGB delay for output 1 set to 3.5
			seconds.

Read RGB delay

X2 *3#

X20

Scaler settings

Output sync format

X2	*	X7	*6#	Syn	X7	0 = RGBHV (default).
						1 = RGBS.

Example:

2*0*6#

Syn00

RGBHV signal on output 2.

Read output sync format

*6#

X2

X7

Output polarity

X2

*

X8

*7#

Pol

X8

X8

:Horizontal/Vertical polarity

0

= H–/V–

2

= H+/V–

1

= H–/V+

3

= H+/V+

Example:

1*1*7#

Pol01

H–/V+ polarity on output 1.

Read output sync polarity

*7#

X2

X8

4-14 Integration Scaling Matrix Switcher • Programmer’s Guide