Extron electronic MTP U R RS SEQ, MTP U R A, MTP U R RSA SEQ manual MTP U R Series Installation

Installation

Installation

CInstallation and service must be performed by authorized personnel only.

The 1U high, quarter rack width, MTP U R receiver can be mounted on a rack shelf, to a rack without a shelf, under a desk or tabletop, or on a projector bracket.

UL guidelines for rack mounted devices

The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the MTP U R receiver in a rack.

1. Elevated operating ambient temperature — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the device in an environment compatible with the maximum ambient temperature (Tma = +122 °F, +50 °C) specified by Extron.

2. Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is not compromised.

3. Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.

4. Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5. Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (e.g., use of power strips).

Rack mounting

For optional rack mounting, mount the MTP on any of the following rack shelves:

•RSF 123, VersaTools® 19" 1U rack shelf kit

(part #60-190-20)

•RSB 123, VersaTools 19" basic 1U rack shelf

(part #60-604-21)

•RSU 126, 6" deep 1U rack shelf kit (part #60-190-10)

•RSB 126, 6" deep basic 1U rack shelf (part #60-604-11)

8MTP U R Series • Installation