Extron electronic MTP U R RS SEQ, MTP U R A TP cable termination, MTP U R Series Installation

TP cable termination

NRJ-45 termination must comply with TIA/EIA T 568A or TIA/EIA T 568B wiring standards for all connections.

Figure 17 details the recommended termination of TP cables with RJ-45 connectors in accordance with the TIA/EIA T 568A or TIA/EIA T 568B wiring standards. Either standard can be used with CAT 5/5e/6 cable, but ensure that the same standard is used on both ends of the cable.

RJ-45

Connector

Side Pins:

1 2 3 4 5 6 78

Insert

Twisted Pair Wires

	T568A	T568B
Pin	Wire color	Wire color
1	White-green	White-orange
2	Green	Orange
3	White-orange	White-green
4	Blue	Blue
5	White-blue	White-blue
6	Orange	Green
7	White-brown	White-brown
8	Brown	Brown

NOTE If you are using Enhanced Skew-Free™ A/V cable, use the TIA/EIA T568A standard only.

Figure 17 — TP cable termination

NEnhanced Skew-free A/V cable is not recommended for Ethernet/LAN applications.

DO NOT connect the input RJ-45 to LAN, Ethernet, outside plant communications, or any telecommunications networks.

NThis cable is specially designed for compatibility with Extron’s Twisted Pair products that are wired using the TIA/EIA 568 A standard.

The table below shows the MTP pin assignments for audio, video, and RS-232 transmission using Extron MTP standards for MTP transceivers.

Pin	RGBHV	RGBS	Component	S-Video	Composite
1	Red/V sync +	Red +	R-Y +	C +	No Signal
2	Red/V sync -	Red -	R-Y -	C -	No Signal
3	Mono Audio	Mono Audio	Mono Audio	Mono Audio	Mono Audio
	or RS-232 +	or RS-232 +	or RS-232 +	or RS-232 +	or RS-232 +
4	Green +	Green +	Y +	L +	Video +
5	Green -	Green -	Y -	L -	Video -
6	Mono Audio	Mono Audio	Mono Audio	Mono Audio	Mono Audio
	or RS-232 -	or RS-232 -	or RS-232 -	or RS-232 -	or RS-232 -
7	Blue/H Sync +	Blue/C Sync +	B-Y +	No Signal	No Signal
8	Blue/H Sync -	Blue/C Sync -	B- Y -	No Signal	No Signal
	Figure 18 — MTP pin assignments
			MTP U R Series • Installation			17