Extron electronic XTP R HDMI, XTP T HDMI Installation and Operation, Cabling, Audio Input Wiring

Installation and

Operation

This section contains the installation procedures for and operation of the XTP T HDMI and the XTP R HDMI. Topics in this section include:

•Cabling

•Making Connections

•Operation

XTP HDMI transmitters and receivers can be mounted in a rack or under a desk or placed on a tabletop (see Mounting on page 29 for more mounting details).

Cabling

XTP T HDMI Rear Panel Connectors
g	a	b		c	d	e f
		INPUTS
POWER			AUDIO	AUDIO	OVER XTP	SIG	LINK
12V
1.0 A MAX			ON	L R	RS-232 IR			RESET

HDMI LOOP-THRU OFF + − + − Tx Rx G Tx Rx XTP OUT LAN

Figure 2. XTP T HDMI Rear Panel Connectors

NOTES:

•For HDMI cables, the maximum cable length is 15 feet.

•Use Extron LockIt lacing brackets to secure HDMI connectors to the device (see HDMI LockIt on page 8).

•Video input from a DisplayPort source must be a dual mode DisplayPort source.

AHDMI input connector — Connect a digital video source to the female HDMI connector. It can accept HDMI, DVI (with an appropriate adaptor), or DisplayPort video signals.

BHDMI Loop-thru connector — Connect a digital video display to the female HDMI Loop-thru connector to locally display the input source (see HDMI Audio Switch on page 14 to select local audio output options). Displays that are not HDCP compliant display a green screen when HDCP encrypted content is sent to them.

CAnalog audio inputs — Connect a balanced or unbalanced analog audio source to the 5-pole captive screw connector for stereo analog audio input.

Tip

Ring

Sleeves

Tip

Ring

L R

Tip

Sleeve

Tip

Sleeve

L

Do not tin the wires! R

Balanced Audio Input Unbalanced Audio Input

Figure 3. Audio Input Wiring

XTP T HDMI Transmitter and XTP R HDMI Receiver • Installation 4