Extron electronic XTP T HDMI, XTP R HDMI Command and Response Tables for Receiver SIS Commands

Command and Response Tables for Receiver SIS Commands

The following commands are for direct connection to the XTP R HDMI (refer to the XTP matrix switcher user guide for commands that can be sent from the matrix to endpoints).

Command	ASCII Command	Response	Additional Description
	(Host to Device)	(Device to Host)
Audio Configuration
Volume control
Set volume	X1!V	VolX1!]	Set the output volume to X1!.
Increment volume	+V	VolX1!]	Increase the audio volume.
Decrement volume	-V	VolX1!]	Decrease the audio volume.
View volume	V	VolX1!]	View current volume setting.
Audio mute
Mute all	3Z	Amt3]	Mute the audio.
Unmute all	0Z	Amt0]	Unmute the audio.
View mute status	Z	AmtX1%]	View the mute status.
Advanced Configuration
Relay control
Pulse relay	X1&*3*X1(O	RlyX1**X@]	Pulse relay X1* for X1( ms.
Toggle relay	X1&*2O	RlyX1**X@]	Toggle relay X1*.
Turn relay on	X1&*1O	RlyX1**1]	Turn relay X1* on.
Turn relay off	X1&*0O	RlyX1**0]	Turn relay X1* off.
View relay status	X1&O	RlyX1**X@]	View the on or off status of relay X1*.
Mute video to black
Mute video to black	1B	Vmt1]	Mute the video and display black video.
Unmute video	0B	Vmt0]	Unmute the video.
View video mute status	B	VmtX*]	View the video mute setting.
Reset mode
Reset to factory defaults	EZXXX}	Zpx]	Resets all user settings back to factory
			defaults.

NOTE: X@ = Enable or disable	0	= off or disable
	1	= on or enable
X* = Video mute	0	= off or disable (default)
	1	= on or enable (mute to black)
X1! = Audio volume	0 - 64 (64 = default)
X1% = Audio mute	0	= unmute all
	3	= mute all
X1* = Relay number	1 = relay 1
	2	= relay 2
X1( = Pulse time	1-65,535(in 16 ms increments)

XTP T HDMI Transmitter and XTP R HDMI Receiver • SIS Configuration and Control 21