Command | ASCII Command | Response | Additional Description |
| (Host to Device) | (Device to Host) |
|
|
|
|
|
EDID |
|
|
|
Set EDID information | EAX2@EDID} | EdidAX2@] | Set the EDID resolution and refresh |
|
|
| rate. |
View EDID information | EAEDID} | EdidAX2@] | View the EDID resolution and |
|
|
| refresh rate. |
Advanced Configuration |
|
|
|
HDCP authorized device |
|
|
|
|
|
|
|
HDCP authorized device on | EE1HDCP} | HdcpE1] | Set the transmitter as an HDCP |
|
|
| authorized device. |
HDCP authorized device off | EE0HDCP} | HdcpE0] | Set the transmitter as not an HDCP |
|
|
| authorized device. |
View HDCP authorized | EEHDCP} | HdcpEX2!] | View the HDCP authorized device |
device setting |
|
| setting. |
Video mute |
|
|
|
|
|
|
|
Mute output to black | 1B | Vmt1] | Mutes video and displays a black |
|
|
| screen. |
Unmute output | 0B | Vmt0] | Unmute the video. |
|
|
|
|
View the video mute status | B | VmtX*] | View the video mute status. |
Test pattern |
|
|
|
|
|
|
|
Set test pattern | X^J | TstX^] | Set color bars test pattern to X^. |
|
|
|
|
View test pattern | J | TstX^] | View the current test pattern. |
Reset mode |
|
|
|
|
|
|
|
Reset to factory defaults | EZXXX} | Zpx] | Resets all user settings back to |
|
|
| factory defaults. |
Status |
|
|
|
|
|
|
|
View input signal presence | OLS | FrqX1^] | View the input signal presence. |
|
|
|
|
Query HDCP input | EIHDCP} | HdcpIX(] | Query the HDCP status. |
|
|
|
|
Query firmware version | Q | x.xx] | Query the firmware version. |
|
|
|
|
Query full firmware version | *Q | x.xx.xxxx] | Query the full firmware version. |
|
|
|
|
Query part number | N | Query the device part number. | |
|
|
| |
NOTE: X^ = Color bars test pattern | 0 = off (default) |
| |
|
| 1 = 1280x720p at 50 Hz | |
|
| 3 = 1280x720p at 60 Hz | |
|
| 5 = 1920x1080p at 60 Hz | |
X* = Video mute |
| 0 = off or disabled |
|
|
| 1 = on or enabled (mute to black) | |
X( = HDCP status |
| 0 = no source connected | |
|
| 1 = | |
|
| 2 = | |
X1^ = Video signal status | 0 = video or TMDS signal not detected | ||
|
| 1 = video or TMDS signal detected | |
X2! = HDCP authorized device status | 0 = off |
| |
|
| 1 = on (default) |
|
X2@ = EDID emulation |
| See the table on page 18. | |
XTP T HDMI Transmitter and XTP R HDMI Receiver • SIS Configuration and Control 20
