Extron electronic XTP T HDMI manual Reference Information, Tabletop Mounting, Mounting Kits

Reference

Information

This section contains mounting information and instructions for updating firmware. Topics in this section include:

•Mounting

•Updating Firmware with Firmware Loader

Mounting

The XTP T HDMI and the XTP R HDMI can be placed on a tabletop or mounted in a rack or underneath a desk.

Tabletop Mounting

Attach the provided rubber feet to the bottom four corners of the enclosure.

Mounting Kits

Mount the unit using any optional compatible rack shelf or mounting kit listed on the Extron website (www.extron.com), in accordance with the directions included with the kit. For rack-mounting, see UL guidelines for rack-mounted devices below.

UL guidelines for rack-mounted devices

The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the XTP T HDMI and XTP R HDMI in a rack.

1.Elevated operating ambient temperature — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature, Therefore, install the XTP T HDMI and XTP R HDMI in an environment compatible with the maximum ambient temperature

(Tma = +122 ˚F, +50 ˚C) specified by Extron.

2.Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is no compromised.

3.Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.

4.Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have an overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5.Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (for example, the use of power strips).

XTP T HDMI Transmitter and XTP R HDMI Receiver • Reference Information 29