26
Programming Reference
Agilent 81101A SCPI Command Summary
Agilent 81101A SCPI Command SummaryCommand Parameter Description
see
page
:ARM (Trigger mode and source)
[:SEQuence[1] | :STARt]
[:LAYer[1]]
:EWIDTh
[:STATe] ON|OFF|1|0 Set/read External Width mode 39
:FREQuency <value> Set/read trigger frequenc y, when
PLL(INT2) used as source
39
:IMPedance <value> Set/read impedance a t EXT INPUT 40
:LEVel <value> Set/read threshold level a t EXT INPUT 40
:PERiod <value> Set/read trigger period, whe n PLL(INT2)
used as source
41
:SENSe EDGE|LEVel Set/read trigger on edge or gate on level 42
:SLOPe POS|NEG|EITH Set/read trigger slope at EXT INPUT 42
:SOURce IMM|INT2|EXT|MAN Set/read trigger source
(VCO|PLL|EXT INPUT|MAN key)
43
:DISPlay
[:WINDow]
[:STATe] ON|OFF|1|0 Set/read front panel display state 43
:MMEMory
:CATalog? [A:] Read directory of memory card 44
:CDIRectory [<name>] Change directory on memory card 44
:COPY <source>[,A:],<dest>[,A:] Copy a file on memory card 45
:DELete <name>[,A:] Delete a file f rom memory card 45
:INITialize [A:[DOS]] Initialize memory card to DOS format 45
:LOAD
:STATe <n>,<name> Load file from memory card to memory n 46
:STORe
:STATe <n>,<name> Store memory n to memory card 46