![](/images/new-backgrounds/1092587/9258749x1.webp)
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have finished.
9.To Remove the Grill Door
Remove the control panel (see 1). Remove the
Note: The arms are spring tensioned. Carefully remove the grill door. Retain the gaskets.
Reassemble in reverse order ensuring that the gasket is fitted between the hinge arm and the front of the grill chamber.
10.To Remove Grill Element
Disconnect from electricity supply.
Remove grill pan from inside the grill compartment; remove the enamelled front shield from the grill roof, by undoing the two screws and washers.
� | � |
Remove the two screws and washers securing the grill element front support. Remove the screws from the grill element.
Lift the element out carefully, disconnecting the leads from the element terminals (noting their position). If it is not possible to disconnect the leads in this way, pull the cooker forward to gain access to the rear, remove the screws securing the electric cover to the back sheet, remove the cover and disconnect the terminals from the rear.
Fit the new element and reassemble in reverse order. Check the operation of the grill.
11.To Replace an Oven Door
Open the oven door. Support the door and remove the two screws securing the upper hinge and gasket to the cooker front
The door is heavy, so take care.
Reassemble in reverse order.
12.To Adjust an Oven Door Angle
The bottom hinge of either oven door can be adjusted to alter the angle of the door
Retighten the hinge screws.
13.To Replace an Oven Door Outer Panel
Move the cooker forward to gain access to the sides.
Open the oven door slightly and remove the front panel fixing screws from the door sides – two each side
Carefully lift off the outer door panel.
Remove the two plastic blanking plugs from the door handle. Remove the door handle from the panel by unscrewing the two retaining nuts. Fit the door handle to the new panel and refit the two blanking plugs to the fixing holes.
Note: If replacing the outer panel on the
Fit the panel to the door. Reassemble in reverse order.
Effect of hinge adjustment - exagerrated for clarity
Centreline of hinge pin |
Oven door omitted for clarity
- Oven door side screws (Elan)
23