Table of Contents |
TABLE OF CONTENTS
1. | Lutron eLumen Description | 1 | |
2. | Driver Scope of Supply | 2 | |
| 1.01 | Supplied by FieldServer Technologies for this driver | 2 |
| 1.02 | Provided by the Supplier of 3rd Party Equipment | 2 |
| 2.1.1. | Required 3rd Party Hardware | 2 |
3. Hardware Connections | 3 | |
4. Configuring the FieldServer as a Lutron eLumen Client | 5 | |
1.03 Data Arrays/Descriptors | 5 | |
1.04 Client Side Connection Descriptions | 6 | |
1.05 Client Side Node Descriptors | 6 | |
1.06 Client Side Map Descriptors | 7 | |
4.1.1. | FieldServer Related Map Descriptor Parameters | 8 |
4.1.2. | Driver Related Map Descriptor Parameters | 8 |
4.1.3. | Timing Parameters | 10 |
4.1.4. | System Monitor Command – Time Now | 11 |
4.1.5. | System Monitor Command – Astro Times | 11 |
4.1.6. | System Monitor Command – Date | 12 |
4.1.7. | System Monitor Command – Code Revision Level | 12 |
4.1.8. | System Monitor Command – Bootcode Revision Level | 12 |
4.1.9. | System Monitor Command – Serial Number | 13 |
4.1.10. | System Monitor Command – Area Status | 13 |
4.1.11. | System Monitor Command – Timeclock Status | 14 |
4.1.12. | System Monitor Command – Zone Intensity | 14 |
4.1.13. | System Monitor Command – Request Panel Emergency Status | 15 |
4.1.14. | System Monitor Command – System Variable Value | 15 |
4.1.15. | System Monitor Command – Wallstation Status | 16 |
4.1.16. | System Monitor Command – Switch Status | 16 |
4.1.17. | System Control Commands containing no Parameters: – Halt Zone | 17 |
4.1.18.System Control Commands containing no Parameters: – Stop Scene
Ramp Up | 17 |
4.1.19.System Control Commands containing no Parameters: – Select System Scene(s) 18
4.1.20.System Control Commands containing no Parameters: – Disable
Timeclock until Enabled | 18 |
4.1.21.System Control Commands containing no Parameters: – Disable timeclock
until end of day or enable issued | 18 |
4.1.22.System Control Commands containing no Parameters: –
timeclock with complete catchup | 19 |
4.1.23.System Control Commands containing no Parameters: –
timeclock and do previous event | 19 |
4.1.24.System Control Commands containing no Parameters: Standard
timeclock | 19 |
4.1.25. System Control Commands containing no Parameters: Run script(s) | 20 |
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408)
