Page 25 of 36 |
4.1.33.System Control Commands containing no Parameters: Simulate wallstation(s) switch press
//Client side Map Descriptors
Map_Descriptors |
|
|
|
|
|
|
|
|
Map_Descriptor_Name, | Data_Array_Name, | Data_Array_Offset, | Function, | Node_Name, | GRAFIK_command, | DA_Lut_List, | DA_Lut_List_Offset, | Length |
Ws_sw_press, | Lut_triggers, | 16, | awt, | LUT_GRF6_0, | sim_ws_sw_press, | Sim_sw_list, | 0, | 1 |
DA_Lut_List data setup |
|
Position from DA_Lut_List_Offset | Description |
0 | Link number ( |
1 | Station of link ( |
2 | Switch on station ( |
3 | Station of link ( |
4 | Switch on station ( |
.. | .. |
63 | Station of link ( |
64 | Switch on station ( |
Note: 1 to 32 switch ids may be used in a single command. To trigger the command, write the number of switch IDs into the Data Array specified by Data_Array_Name at Data_Array_Offset.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408)
