FieldServer FS-8700-84 instruction manual Area tclk

FS-8700-84_Lutron_eLumen Driver Manual Page 23 of 36

4.1.29.System Control Commands containing no Parameters: Timeclock new schedule

//Client side Map Descriptors

Map_Descriptors
Map_Descriptor_Name, Data_Array_Name,		Data_Array_Offset,	Function,	Node_Name,	GRAFIK_command,	DA_Lut_List,	DA_Lut_List_Offset,	Length
Tck_new_sched,	Lut_triggers,	12,	awt,	LUT_GRF6_0,	tclk_new_schedule,	Clk_sched,	0,	1

DA_Lut_List data setup
Position from DA_Lut_List_Offset	Description
0	Area tclk 0
1	Schedule 0
2	Area tclk 1
3	Schedule 1
..	..
60	Area tclk 30
61	Schedule 30
62	Area tclk 31
63	Schedule 31

Note: 1 to 32 new schedules may be started by this command. To trigger this command, write the number of area timeclocks into the Data Array specified by Data_Array_Name at Data_Array_Offset.

4.1.30.System Control Commands containing no Parameters: Set timeclock

// Client side Map Descriptors Map_Descriptors

Map_Descriptor_Name,	Data_Array_Name,	Data_Array_Offset,	Function,	Node_Name,	GRAFIK_command,	DA_Lut_List,	DA_Lut_List_Offset,	Length
Set_tck,	Lut_triggers,	13,	awt,	LUT_GRF6_0,	set_tclk,	Set_tclk,	0,	1
DA_Lut_List data setup
Position from DA_Lut_List_Offset		Description
0		Hour ( 0-23 )
1		Minutes ( 0-59 )
2		Month ( 1-12 )
3		Day of month ( 1-31 )
4		Year ( 0 – 99 )
5		Day of week ( 1-7, 1=Sunday )

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com